kci_rootfs

How to build a rootfs image using kci_rootfs

You will be using kernelci/debos:kernelci docker image for this purpose.

1. Pull the docker image docker pull kernelci/debos:kernelci

2. Clone the kernelci-core repo.

   git clone https://github.com/kernelci/kernelci-core.git
   

3. Start the docker and get into it.

   $ sudo docker run -it \
     -v $(pwd)/kernelci-core:/kernelci-core \
     --device /dev/kvm -v /dev:/dev \
     --privileged -u root kernelci/debos:kernelci \
     /bin/bash -c 'usermod -a -G $(stat -c %g /dev/kvm) kernelci && su - kernelci'
   $ cd /kernelci-core/
   

4. Now to check if everything works, type ./kci_rootfs --help it should produce below help message.

   usage: kci_rootfs [-h] [--yaml-configs YAML_CONFIGS]
   
                     {validate,list_configs,list_variants,build,upload} ...
   optional arguments:
     -h, --help            show this help message and exit
     --yaml-configs YAML_CONFIGS
                           Path to the YAML configs file
   Commands:
     {validate,list_configs,list_variants,build,upload}
                           List of available commands
       validate            Validate the rootfs YAML configuration
       list_configs        List all rootfs config names
       list_variants       List all rootfs variants
       build               Build a rootfs image
       upload              Upload a rootfs image
   

5. To list available rootfs configuration, you can use list_configs option.

   $ ./kci_rootfs list_configs
   buildroot-baseline
   bullseye
   bullseye-cros-ec
   bullseye-igt
   bullseye-libcamera
   bullseye-ltp
   bullseye-rt
   bullseye-v4l2
   sid
   

   By default kci_rootfs reads entries from rootfs-configs.yaml. This file acts as a rootfs config file.

6. Let’s list all available rootfs images using ./kci_rootfs list_variants. It should show existing rootfs name along with its architecture. Here are a few examples taken from the full list:

   buildroot-baseline riscv
   buildroot-baseline x86
   bullseye mips64el
   bullseye-libcamera amd64
   bullseye-ltp amd64
   bullseye-rt armhf
   

   It also comes with couple of options --rootfs-config and --arch to filter the results based on config name or arch type.

   $ ./kci_rootfs list_variants --rootfs-config bullseye --arch i386
   bullseye i386
   
   $ ./kci_rootfs list_variants --rootfs-config bullseye
   bullseye amd64
   bullseye arm64
   bullseye armel
   bullseye armhf
   bullseye i386
   bullseye mips64el
   bullseye mipsel
   
   $ ./kci_rootfs list_variants --arch amd64
   bullseye amd64
   bullseye-cros-ec amd64
   bullseye-igt amd64
   bullseye-libcamera amd64
   bullseye-ltp amd64
   bullseye-rt amd64
   bullseye-v4l2 amd64
   

7. Now it’s time to re-build existing rootfs image using kci_rootfs build. It takes three arguments:

   • --rootfs-config refers to rootfs name which you want to build
   • --data-path points to debos files location
   • --arch refers to CPU arch you want to build

   For example, to build a bullseye rootfs image for i386, you can run

   ./kci_rootfs build \
       --rootfs-config bullseye \
       --data-path config/rootfs/debos \
       --arch i386 \
       --output /tmp
   

   depending on your network speed, this will take some time to complete.

8. If build is successful you should see message like

   cd ${ROOTDIR} ; find -H  |  cpio -H newc -v -o | gzip -c - > ${ARTIFACTDIR}/bullseye/i386/rootfs.cpio.gz | ./build_info.json
   cd ${ROOTDIR} ; find -H  |  cpio -H newc -v -o | gzip -c - > ${ARTIFACTDIR}/bullseye/i386/rootfs.cpio.gz | 79539 blocks
   Powering off.
   ==== Recipe done ====
   

   Finally newly built rootfs images can be found under the directory pointed by --output. In our case, its /tmp.

   $ ls /tmp/_install_/bullseye/i386/
   build_info.json  full.rootfs.cpio.gz  full.rootfs.tar.xz  initrd.cpio.gz  rootfs.cpio.gz  rootfs.ext4.xz
   

Create a new rootfs image

Now you know how to build default kci_rootfs images. Let’s look at how to add simple bullseye rootfs image.

1. First you need to add appropriate entries to rootfs_config.yml file.

     bullseye-example:
       rootfs_type: debos
       debian_release: bullseye
       arch_list:
         - amd64
         - arm64
       extra_packages_remove:
         - e2fslibs
         - e2fsprogs
   

Above entry will create rootfs named bullseye-example for CPU amd64 and arm64 architectures without e2fslibs and e2fsprogs packages. List of possible rootfs-config yaml entries and its description are listed below:

Please note at the moment, only debos is supported as rootfs_type and above options are debos specific.

2. Now validate rootfs-config.yml entries using ./kci_rootfs validate and verify that it didn’t report any errors.

3. If no issues reported during validation, start the build process using,

   ./kci_rootfs build \
       --rootfs-config bullseye-example \
       --data-path config/rootfs/debos \
       --arch amd64
   

   and wait for its completion. If everything went fine you should see something like below under config/rootfs/debos/bullseye-example/amd64/ directory.

   ls config/rootfs/debos/bullseye-example/amd64/
   build_info.json  full.rootfs.cpio.gz  full.rootfs.tar.xz  initrd.cpio.gz  rootfs.cpio.gz  rootfs.ext4.xz